FEMA IS 156: Building Design for Homeland Security for Continuity of Operations Answers

1. A ____________________ is an action, device, or system used to reduce risk by affecting as asset, threat, or vulnerability.
 A. Defensive corollary
 B. Consequence
 C. Aggressor tactic
 D. Mitigation measure

2. Personal protective equipment is only effective against specific agents if:
 A. The PPE is stored in warm dry office space
 B. The HVAC system is turned off and the building is sealed
 C. The purchased equipment is one size fits all
 D. The PPE is worn correctly when needed

3. The consequences are defined as the degree of ________________ that is caused by the loss of an asset.
 A. economic disruption
 B. productivity interruption
 C. debilitating impact
 D. customer dissatisfaction

4. A vulnerability can be described as weakness that can be exploited by someone or as weakness that would make a facility susceptible during a natural disaster.

5. Brittle materials such as glass are most affected by?
 A. Impulse Wave
 B. Peak incident pressure
 C. Shock wave
 D. Both A & B

6. Which biological agents are contagious
 A. Anthrax
 B. Salmonella
 C. Ricin
 D. Small pox

7. Which of the following public areas should be separated from areas requiring more security by the use of buffer zones?
 A. Warehouses
 B. Parking areas
 C. Retail establishments
 D. Lobbies
 E. All of the above

8. What preparations are needed in order to safely shelter in place?
 A. Lan ports for laptops, printer paper, office supplies, food and water, Duct tape and plastic, plants
 B. Permanently sealed room, direct phone line, 1 gallon of water per person per day, good ventilation
 C. Supplies to seal room, HVAC shutoff, carbon dioxide absorbers, food and water, communications, and a well practiced plan
 D. Supplies to seal the room, HEPA filter, food and water, windows and a well practiced plan

9. When designating or designing a Continuity of Operations (COOP) facility,which hazards should be considered?
 A. Man-made
 B. Natural
 C. terrorist
 D. All of the above

10. Lacerations occur the furthest distance from an explosive event as a result of?
 A. Sub-standard structural components.
 B. high- velocity glass fragments.
 C. Projectile debris from progressive collapse
 D. blast loading effects of the 2/3's conflaguration.

11. Of all blast mitigation measures which is the most effective?
 A. added steel reinforcement
 B. thicker glass veneer
 C. increased stand-off distance
 D. All are equally effective

12. CBR detectors can not be successfully integrated into the buildings security operations center and building automation systems.

13. When estimating the direct consequences of an attack you should consider, the target, the effect of the weapon, physical and environmental conditions and ________________ ?
 A. estimated damage
 B. how many people work in the building
 C. cascading effects
 D. potential losses

14. Continuity programs are a required and critical component of Government and critical infrastructure operations, and during emergencies and disasters, ensure that the Government at all levels can continue to operate and provide essential functions and services.

15. The concept of Design basis Threat (DBT) is essential to building protection because?
 A. DBT establishes the minimum criteria necessary for the proper selection of window thickness and fragment retention films.
 B. DBT provides a means to identify and characterize all threat groups operating in the local area that could impact the buildings occupancy.
 C. DBT provides the mitigations necessary to ensure that standoff is kept to a minimum.
 D. DBT establishes the threat tactics that architects and engineers use in designing mitigations for a new structure or renovation.

16. A threat is any indication, circumstance, or event with the potential to cause loss of, or damage to an asset?

17. Which type of map can be used for establishing emergency evacuation routes?
 A. Emergency response map
 B. 10 mile radius map
 C. metro center map
 D. regional transportation map

18. Which of the following is the least desirable type of passive barrier, in terms of its vehicle stopping ability, aesthetics, affect on pedestrian access, and performance in blast loading?
 A. Berms
 B. Bollards
 C. reinforced street furniture
 D. Jersey Barriers

19. In some cases the best mitigation measure may be to nothing?

20. According to the FEMA 452 Manual which tier of Risk Assessment methodology requires using blast and WMD models?
 A. Tier 1
 B. Tier II
 C. Tier III
 D. Tier IV

21. Risk is a combination of: The probability that an event will occur, and the probability that a terrorist will be able to successfully plan an attack?

22. Assessing a building's vulnerabilities requires a multi-disciplinary team. It should not be conducted solely by an engineer or security specialist?

23. Assembling a GIS Portfolio can help in performing a Vulnerability Assessment on a continuity facility?

24. Layers of defense are used to provide?
 A. A basis for the design based threat.
 B. justification for funding expenditures for new technology.
 C. defensive barriers to channel hostile vehicles toward active barriers.
 D. Multiple opportunities to detect and defeat an aggressor.

25. Activated Carbon filters are designed to filter a broad range of toxic chemicals, but not all chemicals.

26. When conducting a building assessment which of the following should be a member of the multi functional team?
 A. engineer/ architect
 B. Security
 C. Emergency Manager
 D. subject matter experts
 E. All of the above

27. Which risk management choice achieves the lowest Risk but has the greatest cost?
 A. Install an electrified fence with razor wire
 B. Do nothing
 C. Harden the building
 D. Install bollards

28. The geographical isolation of the United States is a sufficient barrier to prevent terrorist attacks?

29. The four main categories of consequences are?
 A. Human impacts, economic impacts, Public confidence and Re-election impacts
 B. Impacts of government ability, damage to company name, distribution of product lines, loss of life
 C. Human impacts, economic impacts, public confidence impacts, and impacts on government ability
 D. Loss of life, loss of communications, loss of revenue, loss of client base

30. Resilience is the ability of an organization or asset to _________________ its critical functionality in a short period of time after the impact of an adverse event.
 A. Maintain or recover quickly
 B. Contract or transfer the responsibility of
 C. gracefully shut-down computer functions of
 D. Back-up data for

31. Which of the following is not an infrastructure single point vulnerabilities common in commercial facilities?
 A. entry/exit points
 B. electrical
 C. water
 D. telecom
 E. All of the above

32. A single point vulnerability is:
 A. A critical infrastructure component with redundant feeds and back-ups
 B. Multiple nodes and distribution paths
 C. Critical components or systems with more than 100 feet of separation
 D. A point where multiple systems come together and an incident at this location could cause multiple systems to be taken down

33. The best way to lower peak incident pressure and the reflective wave is?
 A. Decrease distance of detonation
 B. increase distance of detonation
 C. peak incident pressure does not cause damage
 D. reflective wave does not matter

34. A ___________________ is any weakness that can be exploited by an aggressor or, in a non-terrorist threat environment, make an asset susceptible to hazard damage?
 A. Consequence
 B. design flaw
 C. Remunerability
 D. Vulnerability

35. The consequences resulting from a pandemic would primarily impact which two areas?
 A. Human
 B. Economic
 C. Public confidence
 D. Government ability
 E. A & B

36. Core functions can include all of the following except?
 A. Primary services or outputs.
 B. Critical activities.
 C. inputs from external organizations.
 D. Building utilities.

37. The process of making the site or building of little to no value or consequence, from the terrorists' perspective, such that an attack on the facility would not yield their desired result.
 A. Deter
 B. Detect
 C. Devalue
 D. Deny

38. The third layer of defense determines which of the following?
 A. Angle of incidence
 B. Stand-off distance required
 C. Amount of explosive
 D. Reflected pressure over the exterior of the building

39. A numeric risk value can be computed once the following information is known:
 A. Design Basis threat, level of protection, defensive layers
 B. Threat rating, consequence rating, vulnerability rating
 C. building ranking, mitigation, level of protection
 D. Threat rating, vulnerability rating, design basis threat

40. Which item is an example of a threat and/or hazard that could potentially impact a building or site?
 A. Bombing
 B. Armed Attack
 C. Kidnapping
 D. All of the above

41. Mitigation measures can be conducted by which of the following means?
 A. Regulatory measures
 B. Rehabilitation of facilities
 C. Protective and control structures
 D. all of the above

42. In most cases trying to add security measures into facility planning proves to be too costly?

43. Consequences can include the ________________ and cost for infrastructure and equipment, it can also include lost profit or a lost capability.
 A. replacement time
 B. cost
 C. loss of personnel
 D. loss of an essential function

44. Risk is defined as the probability of an event times the consequences if it occurs?

45. The initial step of a risk assessment is to:
 A. Evaluate the security master plan.
 B. Define and understand a building's core functions and processes, and identify building infrastructure.
 C. Interview staff to determine if there are alternates assigned to key functions.
 D. Collect site data from interactive GIS maps.

46. What is the primary method of terrorist attack according to NCTC?
 A. bombings and arson
 B. kidnapping
 C. CBR attacks and fire bombing
 D. armed attack and bombings

47. The most commonly selected terrorist targets, worldwide, are?
 A. Military bases
 B. Government facilities
 C. Law enforcement facilities
 D. Commercial facilities

Find more answers here: FEMA Test Answers

FEMA Test Answers Logo